Adding to the Medieval property portfolio

 

While putting together the serf threshing the wheat vignette in the earlier post, I also bodged together a couple more pieces of Medieval village to add to the collection.

The building and fences are from Renedra. I filled the existing "smoke hole" with Greenstuff and then built a chimney from Wills Scenics stone, the gaps in the thatch afterwards were also bodged with Greenstuff.

The door was built from split coffee-stirrers and the fence posts are satay skewers.

I also built a small garden with a trio of beehives. The bench and stool are from the Victrix market set, while the beehives are from TT Combat.

The gate is built from split coffee stirrers. 

Finally, that threshing serf from the earlier post, teh pile of straw is just long static grass built up in layers.

For Sale: Terrain and books and all kinds of stuff!

 The clear-out continues, I still need the room :D

All prices include UK Postage.

Five painted 28mm Medieval buildings - £75.00

Church and four hovels. SOLD

Loads of sabots for 20mm round bases, all magnetic receptive with magnets on the bottom - £60.00

47 x 8-figure

8 x 6-fgure

18 x 4-figure

7 x 2-figure

3 x 6-figure skirmish bases

Two scenario books for Laserburn - £10.00

Wargames Atlantic British Riflemen - still on sprues - £15.00

Wargames Atlantic bases - £25.00

72 round bases

48 pill bases

There is still a bunch of stuff left over from the last sale too.

I've still got two packs of 28mm Victrix Household Cavalry, £15.00 each or £25.00 for the pair

Warhammer Ancients: Fall of the West - £15.00

Warhammer Ancients: Chariot Wars - £15.00

Warhammer Ancients: Fall of the West (strangely I have two) - £15.00

General de Brigade - £15.00

Medieval buildings and scenic scatter.

I've been progressing well with the Barons' War project and wanted to add to the terrain collection

The first piece is a 3D printed house ordered from the seller TCWminiatures3D on Etsy.

It's a lovely piece with bags of detail.

The interior is nicely detailed too.

The next piece is a market stall, also from TCWminiatures3D

I'd rate this one as "fair" it's massively over sized, that mug on the bar is about the size of a space marines torso!

Again, some nice, if large, interior detail.

Last up from TCWminiatures3D, I tagged a few accessories onto my order.

A rather nice fountain, I added some water effects.

I'm sure that the stair case will come in handy somewhere. The barrels were picked up at the FIASCO show last year, not sure of the trader.

I've already got quite a few Renedra pieces in the collection, but they do come out nicely, so I added some more. 

I do like to add vegetable patches to these builds, it makes them more lived in.

This is a wattle and daub outbuilding with wattle fences, the fence posts are made from satay skewers.

The last piece in this post is a vegetable patch using more Renedra wattle fencing. The gate is built from coffee stirrers.

Victoria stepped up to the mark when I said I'd like some model cabbages!

Grotty Hovel

It's been quite a while since I added any new 28mm Terrain, but this had been sitting in my backlog for about a year assembled and painted a dark chocolate brown.

The base of it is a pair of Warbases lean-to's glued back to back in a L-shape, slathered in caulk and stuck on a plywood base. The stone wall around the small exterior yard is built up from pebbles, while the roof is cut from cereal packet.

The cobbled area is an off-cut of a Wills sheet. A quick and dirty paint job and it is ready for our game later this week.

Star Wars: Legion - Dice tower

In my order from Panhandle3DPrinting I added a dice tower for our Star Wars: Legion games. Like the rest of the stuff we bought it was easy to clean up and was primed with basic flat grey primer.

I then gave it an all over coat of VMC Blue Grey Pale and painted the dark areas with VMC German Grey and gave the whole thing a sepia wash.

One that was dry I re-applied the base-coats and added a couple of highlights to each colour, then painted a few yellow lines on it and highlighted those.

The final step was at Victoria's recommendation to take a knackered old brush and stipple on areas of dirt, grime and damage. I liked that effect so much that I went back over the Desert Town House that I showed in my last post and did it for that too.

I think for the Star Wars feel of things they should always look a bit fucked up.

We used the dice tower in our last game, it obviously hates me and that did not go well with Victorias Imperials scoring a solid victory.

Star Wars: Legion - Terrain

We needed some more terrain for our Star Wars: Legion games so a search of Etsy revealed many sellers doing some great looking 3D printed stuff for the game. 

We dropped an order on Panhandle3DPrinting and a big box of stuff arrived in about two weeks. 

The first set I painted was the "Chem Tank Pack 2", set. This was my first go at 3D printed terrain and I think that more prep-work will be needed in the future, for instance on the top of the tanks where I can really see the print lines. 

It was all done from a base-coat of very dark grey and then some panels were picked out in other shades of grey and rust streaks added.

In the order I also got a "Desert Town House 'C'" from a grey basecoat I worked up the highlights on the walls with dry-brushing. The roof and doors were painted Panzer Grey and also highlighted up.

The exposed blocks around the bottom were painted Basalt Grey with a couple of lighter layers dry-brushed over that.

Victoria has completed the Imperial Specialists pack with the Medical droid being her latest figure painted.